The Benefits of airkrete® Insulation:
- offers a high R-value 3.9 per inch
- flows around obstructions in the wall during installation preventing voids
- does not shrink or settle in the wall, which eliminates unwanted air infiltration
- will not burn – an important consideration especially in homes with older wiring
- is resistant to insects and rodents
- will not support mold growth
- is a true Green product. It contains no Carcinogenic fibers, no CFCs or Formaldehyde. airkrete is odorless and free of toxins that may affect the chemically sensitive.
Airkrete is the best choice for retrofitting insulation into enclosed cavities. Click here to visit airkrete.com
It’s the only retrofit non-expanding foam that fills every nook and cranny in your walls and air seals while it insulates. airkrete cementitious foam is installed from the exterior of your home so there is minimal inconvenience to you. It has a shaving cream consistency so as it’s pumped into your wall it flows around receptacles, wires, pipes and other obstructions to fill the cavity. It does not settle, shrink or lose R-value over time. It stops air infiltration, as does every foam. This makes the biggest difference because without drafts your home will fell more comfortable.
Airkrete is the only 100% fireproof residential insulation. It is 100% non-toxic and environmentally safe. It does not contain carcinogenic fibers, asbestos, fiberglass, formaldehyde or chlorinated fluorocarbons. Airkrete is odor free and non-corrosive. Due to its cementitious nature it is 100% insect, rodent and mold resistant. airkrete is a 100% green product. In fact, for their model 21st century green building the Audubon Society chose airkrete to insulate their corporate headquarters in New York City.
airkrete has been on the market since 1983. It is roughly the consistency of shaving cream when it is put in place, then it quickly becomes more rigid. It is typically installed in an existing wall by injecting it into holes drilled in the building exterior. Unlike other synthetic foam products, airkrete is a cementitious material. This means that it is more closely related to concrete than to plastic. As a result it is almost completely odor free and contains no formaldehyde or any other known toxic substances. airkrete must be installed by licensed applicators.
Airkrete is 100% non-toxic, free of CFC’s and formaldehyde, free of asbestos and all other carcinogenic fibers. It is odor-free, has a high R-value, has no loss of R-value over time (non-shrink, non-settling), fireproof, with no by-products of combustion.
Airkrete cementitious foam is a magnesium-based product that is derived from seawater. Foam is the most effective product for retrofitting into existing walls because of its consistency. Foam will work its way around any obstacle, providing a near-100 percent wall fill (cellulose, for example, may not fill completely around bundles of wires or pipe runs and leave random voids). Unlike bottled foam insulation used to seal small gaps around pipes and wiring, airkrete does not shrink or expand. In new construction, airkrete can be installed after drywall is hung, but taping and texturing drywall joints should be completed after the foam has completely dried (usually about 48 hours). Cementitious foam is the most benign in regards to indoor air quality; when it is being applied into a wall there is no dust. It sounds like the perfect insulation. With an insulating value of 3.9 per inch, it would exceed R-21 in a 2×6 wall.
It completely seals the cavity preventing air leaks. It doesn’t shrink. It won’t burn or attract pests. It’s non-toxic and excellent for people who are sensitive to chemicals.